kmode exception not handled error fixed

(Fixed) KMode Exception Not Handled Error

Windows operating systems can become bothersome sometimes especially due to these types of Blue screen of death errors. This BSOD error comes in Windows 10 but can also occur in other versions of Windows. The most common reason why this error appears, due to a faulty Windows driver. When the error occurs, it restarts your system all of a sudden and then a restart loop can happen. This KMode Exception Not Handled Error to be fixed in easy and effective ways.

What is KMode Exception Not Handled Error?

Kmode_exception_not_handled is a BSOD(Blue Screen of Death) error on Windows 10. It can be caused by numerous things, from Bad drivers to wrong software installed on your PC.

kmode exception not handled error

There are a few proven methods we can try to have the PC free from this BSOD error.

Method 1- Disable Fast Startup

The easiest method to fix this Blue Screen of Death error is by the disabling fast startup option. Here are the necessary steps to follow-

  1. Go to your system’s control panel
  2. Open the System and Security tab
  3. Select the Power Options
  4. Pick Choose what power buttons do
  5. Select Change settings that are currently available
  6. Uncheck the box that reads Turn on fast start-up
  7. Save the changes
KMode Exception Not Handled

In most of the cases, this will solve KMode Exception Not Handled BSOD Error Windows 10.

Method 2- Update Your System Drivers

As mentioned earlier, the Blue Screen of Death error can appear due to a faulty driver. And to fix this KMode Exception Not Handled, updating your drivers is one of the main solutions. But sometimes even when users are trying to update the Windows drivers, they encounter the same KMode Exception Not Handled error. If you perform it in a safe mode,you will have to interrupt the normal system booting process three times in a row to enter into safe mode.

To enter the safe mode, you need to turn on your system and press the power button before the devices finish booting up. Then press and hold the power button for about 4 seconds to turn off your system and restart it in safe mode.

You need to perform this process 3 times continuously and the fourth time your computer boots up, it will perform an automatic repairing process. It will then diagnose your BSOD error and will show you an Automatic Repair screen. Then, you will have to select Advanced Options and pick Troubleshoot.

  1. Go to the Advanced Options and open Startup Settings
  2. Press 4 on the keyboard and your system will Restart
  3. When your PC starts booting up again, press 4 again to enter into safe mode
(Fixed) KMode Exception Not Handled Error

After entering into safe mode, follow these instructions-

  1. Press Windows Key + X together on your keyboard
  2. From the context menu that appears, click Device Manager
  3. In the Device Manager window, search for Other Devices
  4. If there is an Unknown Device, it is the reason for your BSOD error
  5. Right-click on that unknown device
  6. Select Update Driver Software
  7. Another screen will appear when you will have to select Search automatically
  8. Wait while system updates your drivers
  9. Then restart your computer.
KMode Exception Not Handled Error BSOD

This method is a bit time-consuming but works in most of the cases.

Method 3- Windows Itself will Fix the BSOD Error

Windows has an in-built capability to repair itself from faulty hardware issues. Though you need to use certain commands to let it perform the feature. There is an SFC Scan feature in Windows that diagnose Windows problems and figure out solutions. While you want to resolve the KMode Exception Not Handled error from your Windows 10, follow the procedure given below-

  1. Press Windows Key + R together to launch the command prompt option
  2. Type cmd in the run box
  3. Then type SFC /scan now and hit Enter
  4. Wait for your Windows to start and finish a process
  5. Then restart your computer when it’s over

This will resolve the problem, no wonder. However, if the KMode Exception Not Handled error still appears after doing all these processes, perform a clean Windows 10 install. Even if a clean install does not fix the problem, then the cause of the problem is the old BIOS version.

KMode Exception Not Handled Error BLUE SCREEN OF DEATH

Depending on your system’s motherboard, you can update your Windows BIOS.


What is Kmode_exception_not_handled?

It is an error in which your computer screen will go blue abruptly and restart. In some cases this can happen so frequently that you will be unable to use your computer for any work. It happens due to a faulty windows driver. 

How do I fix a Kmode_exception_not_handled error in Windows 10?

You can fix the error by following the given instructions – 

  1. Go to control panel, you can search for it in windows menu
  2. Click on ‘syatem and security’ tab
  3. Open ‘power options’
  4. Select ‘choose what power buttons do’
  5. Uncheck the box which reads ‘turn on fast start-up’
  6. Save the changes

Is the blue screen of death bad?

Blue Screen of Death will not ultimately harm your computer. However, the abrupt restarting of computer can lead to loss of data and if the frequency is high, it will limit the efficiency at which you can work on your computer. Hence, it is advisable to fix the problem to have optimum conditions for working.

How do you check if a driver is corrupted?

  1. Open the ‘run’ window by pressing windows button and ‘R’ together
  2. Type ‘devmgmt.msc’ in the box and press enter
  3. Any device which has a yellow exclamation mark with it, is a corrupted drive and you will need to fix it to run your computer smoothly

How do I update all my drivers?

You can update all your drivers automatically by following the given instructions. This will insure that Microsoft will update your drive itself if there are any new upgrades.

  1. Open settings and select ‘update and security’
  2. Choose ‘windows update’
  3. Tick on the ‘check for updates’ button
  4. Save changes

Can RAM cause blue screen?

Yes, a faulty RAM can be one of the many reasons for causing blue screen. You can check if blue screen in your computer is caused by the faulty RAM by following the instructions given below – 

  1. Open control panel
  2. Search for ‘memory’ in the search bar and open it
  3. Click on ‘administrative tools’ and choose ‘diagnose your computer’s memory problems’
  4. Select ‘restart now and check for problems’ for scanning immediately
  5. Follow the instructions given on screen when it restarts 
  6. The diagnostic tool will tell you if the RAM is the cause of blue screen error

There are so many articles and posts available on Google to help you sort out this issue. And after that, you won’t see the BSOD error anymore. You will be able to use your system like before without interruption. Take a minute to tell us in the comment box below which of these methods worked for you to fix the KMode Exception Not Handled BSOD error.

Read More How to Fix Windows Update Error 0x80070057

Leave a Comment